WFC- SC(H) Series
.
Installation
- 3 -
2. Handling
2.1 Rigging
Remove the crate and wooden base from
the absorption chiller-heater. Lift the
machine using a wire rope and eye-bolts
(eye bolts provided with the chiller-heater
as illustrated in figure 1). The dry weight
and overall dimensions are detailed in
section 1 Specifications of this manual.
Care should be taken throughout to avoid
damage to panels and piping connections –
always lift in a vertical manner.
Figure 1
2.2 Access Clearances
Properly plan to ensure an accessible
route to the place of installation before
moving the chiller-heater. If it is not
possible to use a crane for lifting, a
fork lift truck may be utilized. In the
event a crane or forklift cannot be used
and the machine must be manhandled
into position, minimum dimensions for
maneuver are shown in
Figure 2
figure 2.
Access Clearance Table (mm)
Dimension
WFC-SC10
WFC-SH10
WFC-SC20
WFC-SH20
WFC-SC30
WFC-SH30
WFC-SC50
A
2,365
2,490
2,565
B
1,600
1,905
2,235
2,145
C
1,600
1,905
2,235
2,420
D
1,600
1,905
2,235
2,420
3. Place of Installation
3.1 Location
The Yazaki absorption chiller-heater units have a weatherproof cabinet suitable for
indoor or outdoor installation. Select the location for the chiller-heater with due
consideration to the position and proximity of the cooling tower, and air handling
equipment. Particular attention must be paid to accessing the absorption machine for
