YATO YT-83080, Original Instructions Manual

Page: 13 / 72

O R I G I N A L I N S T R U C T I O N S
13
EN
dry cloth. Do not immerse the product in water or any other liquid. Prevent the product slots from soiling. In case of dirt
penetration into the slot, try to blow it out with a compressed air jet at a pressure not higher than 0.3 MPa. Do not use
hard objects to clean slots, this may cause damage to the slot or short circuit.
Storage and transport of product
The product should be stored in contained, shaded places, where temperature does not exceed the range speci fi ed in
the table, and relative humidity is below 90%.
The product should be transported taking into account recommendations speci fi ed in point: “Transport of batteries”.
TECHNICAL DATA
Parameter Measuring unit Value
Catalogue number YT-83080 YT-83081
Starting rated voltage [V d.c.] 12 12
Starting rated current [A] 200 200
Starting peak current [A] 400 400
Starting time [s] 2 2
Interval (break time) [s] 30 30
USP slot output voltage [V d.c.] 5 5
Max. USB slot output current [A] 2 2
DC slot output voltage [V d.c.] - 12
Max. DC slot output current [A] - 3.5
Input voltage [V d.c.] 14 14
Input current [A] 1 1
Battery rated voltage [V d.c.] 3.7 3.7
Battery capacity [Ah] 7.5 9
Battery energy [Wh] 27.75 33.3
Battery type Li-Po Li-Po
Operating temperature [ O C] 0–35 0–35
Storage temperature [ O C] 0–50 0–50
Charging time [h] 2 3
Weight [kg] 0.21 0.34
Charger
Input rated voltage
[V~] 110-240 110-240
Rated frequency [Hz] 50/60 50/60
Output rated voltage [V d.c.] 14 14
Output rated current: [A] 1 1