44
5
SETTING OPERATION CONDITIONS
5.1
DIGITAL OPERATOR KEY DESCRIPTION
Mode Indicator LEDs
Drive Mode Display
Lights when selecting drive mode. OFF when selecting
any mode other than drive mode.
Rotating Direction Display
FWD
: Lights at forward run.
REV
: Lights at reverse run.
Remote Mode
Lights when selecting input mode from the control
circuit terminal.
SEQ
: Lights when selecting run command from
control circuit terminal.
REF
: Lights when selecting frequency reference
from control circuit terminals 13 and 14.
Display
Displays set values of each function or monitoring
values such as frequency and output current. (2 lines
¢
16 characters)
Menu Key
Displays the menu for mode selection.
Escape Key
Returns to the status entered before [DATA/ENTER]
key was depressed.
Write/Read Key
Selects mode, group, function or constant name. Dis-
plays each constant set value while displaying a constant
name. By depressing this key again, the set value is
written in.
Menu/Number Change Keys
Selects mode, group, function, constant name or set
value.
∧
: Increment key
∨
: Decrement key
Digit Selection Key
Selects a digit of a set value to be changed. The selected
digit blinks. (Resets operation at faults.)
Operation Command Keys
Operation command keys operate the inverter. Enabled
only in the drive mode.
* STOP
: Red LED lights by depressing STOP.
* RUN
: Red LED lights by depressing RUN.
FWD/REV
: Selects forward or reverse run.
JOG
: Jog run is enabled while depressing this
key.
Operation Mode Selection Key
The operation mode is alternated between REMOTE
and LOCAL (digital operator).
* RUN or STOP LED changes in accordance with the following operations.
Inv. Output Frequency
STOP
RUN
STOP
Freq. Setting
RUN
LED
STOP
LED
: ON
: BLINKING
D
: OFF
Note : Only a digit that
is blinking can be
changed.
Fig.
17
Digital Operator Key Description
LOCAL
REMOTE
MENU
DIGITAL OPERATOR
JVOP
−
130
ESC
DATA
ENTER
JOG
FWD
REV
RESET
RUN
STOP
DRIVE FWD
REV
REMOTE
REF
SEQ