manualshive.com logo in svg

YASKAWA VIPA SPEED7, Operation Manual, Page: 170 / 1007

Share
Download
YASKAWA VIPA SPEED7 Operation Manual Download Page 170

ERROR

STATUS

Description

1

8B07h

Parameter error, the length of the parameter field is invalid.

1

8B08h

Parameter error, the ID of the subfield is invalid.

1

8B09h

System error, the connection does not exist.

1

8B0Ah

Data error, the content of the subfield is not correct.

1

8B0Bh

Structure error, a subfield exists twice.

1

8B0Ch

Data error, the parameter does not contain all the necessary parameters.

1

8B0Dh

Data error, the 

CONF_DB

 does not contain a parameter field for system data.

1

8B0Eh

Data error/structure error, the 

CONF_DB

 type is invalid.

1

8B0Fh

System error, the CP does not have enough resources to process 

CONF_DB

 com-

pletely.

1

8B10

Data error, configuration by the user program is not set.

1

8B11

Data error, the specified type of parameter field is invalid.

1

8B12

Data error, too many connections were specified.

1

8B13

CP internal error

1

8F22h

Area length error reading a parameter.

1

8F23h

Area length error writing a parameter.

1

8F24h

Area error reading a parameter.

1

8F25h

Area error writing a parameter.

1

8F28h

Alignment error reading a parameter.

1

8F29h

Alignment error writing a parameter.

1

8F30h

The parameter is in the write-protected first current data block.

1

8F31h

The parameter is in the write-protected second current data block.

1

8F32h

The parameter contains a DB number that is too high.

1

8F33h

DB number error

1

8F3Ah

The target area was not loaded (DB).

1

8F42h

Timeout reading a parameter from the I/O area.

1

8F43h

Timeout writing a parameter from the I/O area.

1

8F44h

Address of the parameter to be read is disabled in the accessed rack.

1

8F45h

Address of the parameter to be written is disabled in the accessed rack.

1

8F7Fh

Internal error

8.2.13.3 

Configuration Data Block

The configuration data block (

CONF_DB

) contains all the connection data and configura-

tion data (IP address, subnet mask, default router, NTP time server and other parame-

ters) for an Ethernet CP. The configuration data block is transferred to the CP with func-

tion block FB 55.

VIPA SPEED7

Network Communication

Ethernet Communication > FB 55 - IP_CONF - Progr. Communication Connections

HB00 | OPL_SP7 | Operation list | en | 18-30

 

170

Summary of Contents for VIPA SPEED7
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments