4.
Pull the module group forward.
5.
For mounting turn all the locking lever of the module group to be mounted upwards.
6.
To mount the module group put it to the gap between the both modules and push it,
guided by the stripes at both sides, to the mounting rail.
7.
Turn all the locking lever downward, again.
8.
Wire your module group respectively plug the wired terminal blocks again.
ð
Now you can bring your system back into operation.
VIPA System SLIO
Basics and mounting
Demounting 16x periphery modules
HB300 | FM | 050-1BS00 | en | 20-40
34
