3.2 Settings for Triggers at Preset Positions
3.2.3 Setting Trigger Outputs at Preset Positions with the S
3-10
3.
Click the
High-Speed Output Settings
Tab.
4.
Set the items for the Output Setting 1 to 32 to use.
Refer to the following section for details on the settings of the items.
5.
After the settings are completed, click the
All Parameters
Button.
The edited data will be written to the volatile memory in the SERVOPACK.
6.
Click the
Save to Flash Memory
Button.
The edited data will be written to the non-volatile memory in the SERVOPACK.
Note: When you write edited data to the SERVOPACK, you must save it to flash memory. If the data is not
saved to flash memory, the edited data will be erased from memory when the power supply to the SER-
VOPACK is turned OFF.
This concludes the procedure to set up triggers at preset positions.
If the
Normal Output Settings
Tab is clicked, the following dialog box will be displayed.
Information