background image

YASKAWA ELECTRIC CORPORATION

New Pier Takeshiba South Tower, 1-16-1, Kaigan, Minatoku, Tokyo, 105-6891, Japan
Phone: 81-3-5402-4502   Fax: 81-3-5402-4580
http://www.yaskawa.co.jp

YASKAWA AMERICA, INC.

2121 Norman Drive South, Waukegan, IL 60085, U.S.A.
Phone: (800) YASKAWA (927-5292) or 1-847-887-7000   Fax: 1-847-887-7310
http://www.yaskawa.com

YASKAWA EUROPE GmbH

Hauptstrasse 185, 65760 Eschborn, Germany
Phone: 49-6196-569-300   Fax: 49-6196-569-398
http://www.yaskawa.eu.com

Published in Japan   March 2012  12-3

MANUAL NO.  TOBP C730600 59A

11-12-7

In the event that the end user of this product is to be the military and said product is to be employed in any weapons systems or the manufacture 
thereof, the export will fall under the relevant regulations as stipulated in the Foreign Exchange and Foreign Trade Regulations.  Therefore, be sure 
to follow all procedures and submit all relevant documentation according to any and all rules, regulations and laws that may apply.

Specifications are subject to change without notice for ongoing product modifications and improvements.

©

 2012 YASKAWA ELECTRIC CORPORATION. All rights reserved.

YASKAWA ELECTRIC CORPORATION

YASKAWA AC Drive-V1000 Option

Modbus TCP/IP

Installation Manual

Summary of Contents for PROFINET V1000















































Reviews: