YASKAWA MP2300S, User Manual, Page: 278 / 462

6.4 Communication with PLC Manufactured by Mitsubishi Electric Corporation (MELSEC protocol)
6.4.2 When the MP2300S Acts as Master (I/O message communication function is used)
6-88
6.
Check the setting values.
The I/O message communication is now set up, when the MP2300S acts as a master.
Caution
When any transmission or connection parameter is changed, the change will be reflected after FLASH has been saved and the
power supply is turned ON again.
( 2 ) How to Set up the Remote Equipment (MELSEC Q series) to Be Connected
This section explains the MELSEC Q series side procedure to set up for connecting the MP2300S with the MELSEC Q
series.
Note: MELSEC Q series are products manufactured by Mitsubishi Electric Corporation.
Contact Mitsubishi Electric Corporation for more information.
1.
Start up GX Developer.
2.
Create a new project.
3.
Set up network parameters (MELSECNET/Ethernet).
Table 6.25 Network Parameter Setting (example)
Setting Item Setting Details
Network Type
Ethernet
Start I/O No. Any
Network No. Any
Group No. Any
Exchange Number
Any
Mode Online