manualshive.com logo in svg

YASKAWA Motoman NXC100, Manual

Share
Download
YASKAWA Motoman NXC100 Manual Download Page 26

1.5  Motoman Safety

1-6

HW0482738

HW0482738

1.5

Motoman Safety

1.5.1

Installation and Wiring Safety

Refer to the MOTOMAN-

†††

 Instructions manual and NXC100 Instructions for details on 

installation and wiring. 
In planning installation, adapt an easy to observe arrangement to ensure safety.  Take safety 
into consideration when planning the installation.  Observe the following when installing the 
manipulator: 

• Select an area such as that described below to install the manipulator:

Confirm that the area is large enough so that the fully extended manipu-

lator arm with tool will not reach a side wall, safeguarding, or the con-

troller.

Failure to observe this caution may result in injury or damage resulting from unexpected 

movement of the manipulator.

• Perform grounding in accordance with all applicable electrical codes.

Failure to observe this caution may result in fire or electric shock.

WARNING

1000 mm or more

1000 mm or more

1000 mm or more

1000 mm or more

P-point maximum envelope
of Manipulator

Safeguarding

Maximum Working Envelope of
Manipulator Including Tool or
Workpiece End

Maximum Working Envelope of
Manipulator Including Tool or
Workpiece End

15/48

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Motoman NXC100





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands