YASKAWA JEPMC-MP2300 User Manual Download Page 114

Page: 114 / 267

4 System Startup and Sample Programs

4.3.2 Reading Sample Programs and Setting and Saving Parameters

4-40

( 6 ) Saving to Flash Memory

Save sample programs that have been transferred individually to the MP2300 to the MP2300 flash memory using the
procedure below.

Right-click the Controller Folder in which the sample programs have been saved and select

Transfer -

Other - Save to Flash

from the pop-up menu that is displayed.

The Save Flash Memory Content Window will appear.

Select

File - Execute

Click the

Yes

Button in the displayed confirmation dialog box, and then click the

Yes

Button in the

TrnSys

Dialog Box that is displayed.

Another confirmation dialog box will be displayed. Click the

Yes

Button. The data will be saved to

flash memory. When saving to flash memory has been completed, a dialog box to confirm that the CPU
is to be run will be displayed. Click the

Yes

Button. Then the display will automatically return to the

Save Flash Memory Content

Window.

Select

File - Exit

to exit saving to flash memory.

Summary of Contents for JEPMC-MP2300












































































































































































































































































Search results

Summary of Contents for JEPMC-MP2300

Reviews:

Brands by name

Popular brands

YASKAWA JEPMC-MP2300, User Manual

Search results

Summary of Contents for JEPMC-MP2300

Reviews:

Brands by name

Popular brands