CAUTION!
Bus interface and power module may not be separated!
Here you may only exchange the electronic module!
In the System SLIO there is the possibility to place up to 64 modules in on line. By means
of the line extension you can divide this line into several lines. Here you have to place a
line extension master at each end of a line and the subsequent line has to start with a line
extension slave. Master and slave are to be connected via a special connecting cable. In
this way, you can divide a line on up to 5 lines. To use the line extension no special con-
figuration is required.
Each periphery module consists of a
terminal
and an
electronic module
.
1
Terminal module
2
Electronic module
The
terminal
module serves to carry the electronic module, contains the backplane bus
with power supply for the electronic, the DC 24V power section supply and the staircase-
shaped terminal for wiring. Additionally the terminal module has a locking system for
fixing at a mounting rail. By means of this locking system your SLIO system may be
assembled outside of your switchgear cabinet to be later mounted there as whole system.
Line extension
Periphery modules
Terminal module
VIPA System SLIO
Basics and mounting
System conception > Components
HB300 | SM-AIO | | en | 17-05
13