Yardworks 060-1300-6, Instruction Manual

Page: 32 / 86

model no.
060-1300-6
| contact us: 1.866.523.5218
32
O
Pe
RA
TION
sTARTING THe eNGINe
To help prevent serious personal injury or
damage to equipment:
1. Make certain the tiller is on a flat, level
surface.
2. Put the wheels in the WHEEL DRIVE
position (wheel pins must be through
holes in wheel hubs and wheel shaft).
3. Move the Depth Regulator Lever all the
way down to the “travel” position, so
that the tines clear the ground.
4. Release all controls on the tiller.
 WARNING: Do not attempt to engage the tines or wheels until you
have read all of the operating instructions.
 WARNING: Before starting engine, put both wheels in the WHEEL
DRIVE position. Never have wheels in FREEWHEEL position when
engine is running. When the wheels are in FREEWHEEL, they do not
hold back the tiller and the tines could propel the tiller rapidly forward or
backward.
 WARNING: Never run engine indoors or in enclosed, poorly
ventilated areas. Engine exhaust contains carbon monoxide,
an odourless and deadly gas.
 WARNING: Keep away from rotating tines. Rotating tines will
cause injury.