Yardworks 060-1300-6, Instruction Manual, Page: 80 / 86

model no.
060-1300-6
| contact us: 1.866.523.5218
80
TROU
bles
HOO
TING
PRObleM POssIble CAUse sOlUTION
Wheels turn, but
tines don’t
Tine holder mounting hardware missing. Replace hardware.
Bolt loose in transmission pulley. Tighten bolt.
Internal transmission wear or damage. Contact Technical Support Team.
Poor tilling
performance
Worn tines. See “Tines” section.
Improper Depth Regulator setting.
See “Depth Regulator Lever
Adjustment”.
Incorrect throttle setting.
Adjust throttle on engine or speed
control on handle bar to highest
setting.
Forward Drive Belt slipping.
See “Checking and Adjusting
Forward Drive Belt Tension” or “Belt
Tension Adjustment”.
DIffICUlTy sTARTING eNGINe (ReCOIl)
PRObleM POssIble CAUse sOlUTION
Something
wrong with the
fuel system: fuel
supply is not
smooth or no fuel
supply
There is no enough fuel in fuel tank and
fuel cock is closed.
Fill fuel, open fuel cock.
Air vent in the fuel filler cap is clogged. Dredge air vent.
Fuel cock is clogged. Clean first and then dredge
Improper or clogged main oil flow hole.
Readjust or clean. Blow to get
through.
Needle valve is not closed properly or start
hole is clogged. Dismantle needle valve and repair,
clean. Blow to get through.
Float is damaged or sticking. Repair float.
Fuel is too filthy or deteriorated. Replace.
There is water in fuel. Replace.
Too much fuel in engine.
Drain extra fuel. Dry up spark plug
electrodes.
Wrong fuel brand.
Select proper fuel brand
corresponding with the
requirements.