model number 054-5764-4 | contact us: 1.866.523.5218
5
General Safety Rules
dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will
EPUIFKPCCFUUFSBOETBGFSBUUIFSBUFGPS
which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with
the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing the power tool.
Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool.
Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a
RVBMJªFESFQBJSQFSTPOVTJOHPOMZ
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained.
CHAINSAW SAFETY WARNINGS
1. Keep all parts of the body away from
the saw chain when the chainsaw
is operating. Before you start the
chainsaw, make sure the saw chain
is not contacting anything.
A moment
of inattention while operating chainsaws
may cause entanglement of your clothing
or body with the saw chain.
2. Always hold the chainsaw with your
right hand on the rear handle and
your left hand on the front handle.
Holding the chainsaw with a reversed
IBOEDPOªHVSBUJPOJODSFBTFTUIFSJTL
PGQFSTPOBMJOKVSZBOETIPVMEOFWFSCF
done.
3. Hold the power tool by insulated
gripping surfaces only, because the
saw chain may contact hidden wiring
SAVE THESE INSTRUCTIONS!
