model number 054-5764-4 | contact us: 1.866.523.5218
20
2. SWITCHING ON AND OFF (See Fig. G)
!
Attention: Check the voltage and current supply: The voltage and current supply
must comply with the ratings on the type plate.
1) To switch the chainsaw on, press the lock-off button (3), then fully press the on/off switch
(2) and hold in this position. The lock-off button (3) can now be released.
2) To switch the chainsaw off, release the on/off switch (2).
Do not stop chainsaw after sawing by activating the front hand guard (manual chain brake).
3. THE CHAIN BREAK (BUILT-IN, MANUAL AND AUTOMATIC AND SYSTEMS) (See Fig. H)
The manual chain brake is a safety mechanism activated through the front hand guard
(6) when kickback occurs. Chain stops immediately.
The following function check should be carried out at regular intervals.
1) MANUAL CHAIN BRAKE: push front hand guard forward (position 2) and try starting the
chainsaw. The chain must not start. To deactivate the kickback brake, pull hand guard
backwards (position 1), and release on/off switch. (See component list for on/off switch
location.)
2) AUTOMATIC CHAIN BRAKE: release the on/off switch to activate chain brake
AUTOMATICALLY.
Assembly
2
Lock-off (3)
On /Off switch (2) (trigger)
G
Pos. 1
Pos. 2
Pos. 1
6 Hand Guard
H
