67
DOOR HARDWARE
Flush the stay roller bracket up underneath the vertical door trim and flush against wall panel
(fig. A)
.
Roll the door all the way over the bracket. If the door does not hit the bracket,
install bracket using 2" screws as shown in
Fig. A
.
If the door hits the stay roller bracket, move the bracket slightly down until the door clears the bracket
(Fig. B)
, then install the bracket
(Fig. A)
.
Loosen nut and move roller until door is hanging free.
Adjust roller for best operation
(Fig. C)
.
Tighten nut securely.
BEGIN
¸
1
2
PARTS REQUIRED:
x2
x6
#12 2" (5,1 cm)
Fig. A
Flush
Fig. B
2"
(35,1 cm)
#12 Screws
Nut
D
O
O
R
Fig. C
Move bolt to adjust roller
for best operation
Move bracket
to clear bottom
of door
Flush
