13
Note: The bevelled ends on each gusset
should always face away from the wood it
is attaching to.
A:
Make sure the assembly is still square
and level then facing one (797) Side Beam
place one (805) Right Gusset on the right
hand side so the top fits tight to the (797)
Side Beam and the bottom fits tight to the
Post Assembly. Attach gusset to (797) Side
Beam with two 5/16 x 2” Hex Bolts (with 5/16”
lock washer, 1/4-5/16” large washer and 5/16”
t-nut). Pre-drill with a 1/8” drill bit then attach
gusset to Post Assembly with two 5/16 x 3”
Lag Screws (with 1/4-5/16” large washer).
Repeat for the left hand side with one (806)
Left Gusset. (F4.1 and F4.2)
B:
Repeat Step A for (796) Front Back Beam.
(F4.1 and F4.2)
C:
Repeat Steps A and B so all 8 gussets are
attached. (F4.1 and F4.2)
Step 4: Attach Gussets
F4.1
Hardware
Wood Parts
F4.2
Tight
Post
Assembly
5/16 x 3”
Lag Screw
5/16”
T-nut
5/16” Lock
Washer
1/4-5/16”
Large Washer
5/16 x 2”
Hex Bolt
5/16 x 2”
Hex Bolt
1/4-5/16”
Large Washer
1/4-5/16”
Large
Washer
5/16 x 3”
Lag Screw
(806) Left
Gusset
(805) Right
Gusset
4 x (805) Right Gusset
4 x (806) Left Gusset
(806) Left
Gusset
(805) Right
Gusset
16 x 5/16 x 3” Lag Screw (1/4-5/16” large washer)
16 x 5/16 x 2” Hex Bolt
(5/16” lock washer, 1/4-5/16” large washer, 5/16” t-nut)
(797) Side
Beam
(797) Side
Beam
(805) Right
Gusset
(806) Left
Gusset
(805) Right
Gusset
(806) Left
Gusset
(796) Front
Back Beam
(796) Front
Back Beam
(806) Left
Gusset
(805)
Right
Gusset
5/16”
T-nut
(796) Front
Back Beam
(797) Side
Beam
5/16” Lock
Washer
1/4-5/16”
Large Washer
