24
AR
AT
BA
Step 13 - Install first roof panel assembly.
(2) Wood Screw - #8 x 1-1/2"
(4) Pan Screw - #10 x 1-1/4".
Align roof panel flush with front beam. Then fasten Beam to Rafter
Brackets with #10 x 2-1/2" Pan Screws
Align apex of Upright with miter surface of Wood Rafter, then
fasten with #8 x 1-1/2" Wood Screws.
AP
AR
AT
Step 13 - Install first roof panel assembly.
(2) Wood Screw - #8 x 1-1/2"
(4) Pan Screw - #10 x 1-1/4".
Align roof panel flush with front beam. Then fasten Beam to Rafter
Brackets with #10 x 2-1/2" Pan Screws
Align apex of Upright with miter surface of Wood Rafter, then
fasten with #8 x 1-1/2" Wood Screws.
F9.1
A:
With three assemblers lift one Roof Panel Frame up and over the pavilion frame so it rests on both (881) Centre
Gable Uprights so the end of Roof Rafter and (877) Rafter are flush to peak of (881) Centre Gable Upright. The
notches at the bottom of the (877) Rafters sit tight on (796) Front Back Beam and flush to the front. From inside
the assembly attach (881) Centre Gable Upright to (877) Rafter with one #8 x 1-1/2” Wood Screw per upright.
One
assembler must remain on a ladder to hold Roof Panel Frame in place until secured.
(F9.1, F9.2 and F9.3)
Step 9: Attach Roof Panels to Frame
Part 1
Roof Panel
Frame
F9.2
Notches rest tight
on (796) Front
Back Beams
x 2
(877)
Rafter
Hardware
Roof
Panel
Frame
(796) Front
Back Beam
F9.3
Outside View
2 x #8 x 1-1/2” Wood Screw
(881) Centre
Gable Upright
Flush
and
tight
(881) Centre
Gable Upright
(796) Front
Back Beam
Flush
(877)
Rafter
Roof
Rafter
#8 x 1-1/2”
Wood Screw
(881) Centre
Gable Upright
Flush
AR
AT
BA
Step 13 - Install first roof panel assembly.
(2) Wood Screw - #8 x 1-1/2"
(4) Pan Screw - #10 x 1-1/4".
Align roof panel flush with front beam. Then fasten Beam to Rafter
Brackets with #10 x 2-1/2" Pan Screws
Align apex of Upright with miter surface of Wood Rafter, then
fasten with #8 x 1-1/2" Wood Screws.
