21
F:
Place one Inside Beam Assembly tight to one Outer Beam Assembly so the ends are flush and the angled
ends match. Bolt heads from the Outer Beam Assembly must be on the outside and Short Beam Inserts will
be on the inside. Connect Inside Beam Assembly to Outer Beam Assembly with 32 #8 x 2-1/2” Wood Screws.
(F4.7 and F4.8)
G:
Repeat Step F with to make 2 Long Beam Assemblies.
Hardware
64 x #8 x 2-1/2” Wood Screw
Step 4: Long Beam Assembly
Part 3
Outer Beam
Assembly
Inside Beam
Assembly
Flush
#8 x 2-1/2”
Wood Screws
(x 32 per
assembly)
F4.7
F4.8
Outer Beam
Assembly
Inside Beam
Assembly
Notice orientation
of angled ends
Hint: Use bolts in
centre to line up bolt
holes. Remove bolts
once step is complete
Flush
