4
Hyperion Vinyl Playset
Assembly Manual
Begin by positioning two 2x6x90's and two 2x6x40's on
a flat surface.
Place 4x4x128" labeled "1" in corner.
Note pre-drilled hole pattern.
Align pre-drilled holes on 4x4 with pre-drilled holes on
2x6. Using 6 7/8" bolts, begin fastening 2x6's to tower
4x4. Thread acorn nut onto rod as you can, then back
off several turns. Be sure to place on flat washer
between acorn nut and vinyl.
Bolts should be flush with outside of 2x6 before putting
on the bracket.
6WHS
:
6WHS
4:
6WHS
3:
6WHS
2:
