![background image](http://html2.mh-extra.com/html/yardcraft/hyperion/hyperion_assembly-manual_3174623020.webp)
Swing beam receiver properly fastened.
Identify ground runner and fasten to end post using
6 1/2" bolts. Thread acorn nut onto rod as far as you can,
then back off several turns. Be sure to place washer
between acorn nut and vinyl.
Step
13
:
Step
16
:
Step
15
:
Step
14
:
Identify end post braces. Fasten the short angle to the
ground runner that was installed on previous step.
Use 4 /18" bolts provided.
Align brace with end post then fasten long angle to end
post using 3/8" x 4" lags provided. This should be pre-
drilled using 1/4" drill bit.
Swing
Frame
Assembly
20