6
Align pre-drilled holes on 4x4 with pre-drilled holes on
2x6. Using 6 7/8" bolts, begin fastening 2x6's to tower
4x4/ Thread acorn nut onto rod as far as you can, then
back off several turns. Be sure to place flat washer
between acorn nut and vinyl. Bolts should be flush with
outside of 2x6 before putting on the bracket.
Repeat previous step in this corner, using 4x4x108"
labeled "4."
Place 4x4x128" labeled "5" in position as shown.
Very important to note drilling patterns on 4x4's.
Fasten using 6 7/8" bolts. Finger tighten acorn nuts at
this point.
6WHS
9
:
6WHS
12
:
6WHS
11
:
6WHS
10
:
Hyperion Vinyl Playset
Assembly Manual
