background image

5

from the extension cord during operation, 

secure the extension cord to the product 

as shown on page 9 in Figs. 5 & 6.

 

WARNING! To prevent electric shock, use 

only with an extension cord suitable for 

outdoor use.

5.  

Avoid accidental starting

 –Do not carry 

the electric snow shovel with your finger 

on the switch. Make sure the switch is off 

before plugging in the unit. If the cord is 

damaged in any manner during operation, 

pull the extension cord from the wall 

receptacle.

6. 

Do not abuse the cord

 – Never carry 

the electric snow shovel by the cord or 

yank the cord to disconnect it from the 

receptacle. Keep the cord away from heat, 

oil and sharp edges.

7. 

Moving parts

 – Keep hands and feet away 

from moving parts. Keep guards in place 

and in proper working order.

8. 

Do not force the tool 

– It will perform 

better with less likelihood of personal 

injury or mechanical damage if it is used at 

the rate for which it was designed.

9. 

Do not overreach

 – Keep proper footing 

and balance at all times. If the electric 

snow shovel strikes a foreign object, follow 

these steps:

• Stop the electric snow shovel.

• Inspect for damage.

• Repair any damage before restarting and 

operating the snow shovel.

10. 

Disconnect the tool

 – Disconnect the 

electric snow shovel from the power supply 

when it is not in use, before servicing 

it, when changing accessories and when 

performing any other maintenance task.

11. 

Store idle tool indoors

 – When not in use, 

the electric snow shovel should be stored 

indoors in a dry, locked place out of the 

reach of children.

12. 

Maintain the electric snow shovel with 

care 

– Follow the applicable maintenance 

instructions for replacing parts and 

changing accessories. Lubrication is not 

required.

This electric snow shovel meets or exceeds 

the B71.3 specifications of the American 

National Standards Institute in effect at the 

time of production.

Read and understand the contents of this 

manual before you start the motor.

This is the safety alert symbol. It 

is used to alert you to potential 

personal injury hazards. Obey all 

safety messages that follow this 

symbol to avoid possible injury or 

death.

Improperly using or maintaining this electric 

snow shovel could result in injury or death. 

To reduce this potential, comply with the 

following safety instructions.

This electric snow shovel can amputate 

hands and feet if used incorrectly. It can also 

pick up foreign objects, which can become 

dangerous projectiles when thrown into the 

air. Failure to observe the following safety 

instructions could result in serious personal 

injury.

Training

Read, understand and follow all instructions 

on the machine and in the manual before 

operating this unit. Thoroughly familiarize 

yourself with the controls and the proper use of 

the equipment. Know how to stop the unit and 

disengage the controls quickly.

Children should never be allowed access to 

the equipment. Adults should never operate 

the equipment without carefully reading and 

understanding these instructions.

Keep the area of operation clear of all persons, 

particularly small children and pets.

Exercise caution to avoid slipping or falling.

Preparation

Thoroughly inspect the area where the 

equipment is to be used and remove all 

doormats, sleds, boards, wires and other foreign 

objects.

Do not operate the equipment without wearing 

adequate winter garments. Avoid loose fitting 

articles of clothing and accessories that can 

become caught in moving parts. Wear footwear 

that will improve footing on slippery surfaces.

Summary of Contents for YF6012-LE














Reviews: