background image

7

circuit(s) or outlet(s) to be used for this 

electric snow shovel. Receptacles are 

available having built-in GFCI protection 

and may be used for this measure of 

safety.

•      To prevent electric shock, use only with an 

extension cord suitable for outdoor use.

Before use, check that the extension cord is in 

good condition. When using an extension cord, 

make sure to use one heavy enough to carry 

the current your product will draw. For lengths 

less than 50 ft (15 m), a No.16 AWG (or greater) 

extension cord should be used. An undersized 

cord will cause a drop in line voltage resulting in 

loss of power and overheating.

Electric shock may cause SEVERE INJURY or 

DEATH. Heed these warnings:

•      Do not allow any part of the electric snow 

shovel to make contact with water while it 

is in operation. If the product becomes wet 

while turned off, wipe dry before starting.

•      Use only a UL-, CSA- or ETL-rated extension 

cord for outdoor, all-weather use.

•      Do not use an extension cord over 100 ft 

(30 m).

•      Do not touch the product or its plug with 

wet hands or while standing in water. 

Wearing rubber or winter boots offers some 

protection.

EXTENSION CORD CHART

Extension 

Cord Length

Up to 50 ft

(15 m)

50–100 ft

(15–30 m)

Wire Gauge 

(AWG):

16

14

•      To reduce the risk of electric shock, this 

product has a polarized plug (i.e. one blade 

is wider than the other). Use this appliance 

only with a polarized UL-, CSA-, or ETL-

listed extension cord recommended for 

outdoor, all-weather use. The plug will fit 

into a polarized extension cord only one 

way. If the plug does not fit fully into the 

extension cord, reverse the plug. If the plug 

still does not fit, obtain a correct polarized 

extension cord. A polarized extension cord 

will require the use of a polarized wall 

outlet. The extension cord plug will fit into 

the polarized wall outlet only one way. If 

the plug does not fit fully into the wall 

outlet, reverse the plug. If the plug still 

does not fit, contact a qualified electrician 

to install the proper wall outlet. Do not modify 

the plug, extension cord receptacle, 

or extension cord plug in any way.

 To prevent the Snow shovel cord from 

disconnecting from the extension cord 

during operation, make a knot with the two 

cords as shown below.

Method of Securing Extension Cord

             

Snow shovel

Extension cord

(A) Tie cord as shown

                            

(B) Connect plug and receptacle

Do not modify the cord. Never pull the snow 

shovel by the cord or yank the cord to 

disconnect it from the receptacle. Keep the 

cord away from heat, oil, and sharp edges.

Summary of Contents for YF6012-LE














Reviews: