background image

4

Warning Symbols on the product

     READ THE OPERATOR'S MANUAL(S) 

– Read, understand and follow all 

instructions in the user manual(s) before 

attempting to assemble and operate.

 

      SAFETY ALERT – Indicates a 

precaution, a warning or a danger.

      WARNING! Electrical shock hazard.

     WARNING! Do not expose the unit to 

rain or wet conditions. 

              Keep dry.

     DANGER! Cutting/dismemberment 

hazard - Keep feet away from the 

rotating paddle.

    DANGER! Cutting/dismemberment 

hazard - Keep hands away from the 

rotating paddle. Do not use hands to 

unclog rotor housing. Stop motor before 

removing debris.

      Keep the flexible power supply cord 

away from the rotating paddle.

     Wear safety gloves during use to protect 

hands.

              Wear safety footwear at all times to 

provide protection against objects that 

may accidentally fall on feet.

  Keep bystanders and children a safe 

distance (at least 11 yd/10 m) away from 

the work area.

    CAUTION! Beware of stones and other 

foreign objects that could be thrown from 

the product.

     Always keep the power cable away 

from heat sources, oils or sharp edges. 

Immediately remove plug from the 

mains if the cable is damaged, frayed or 

entangled.

     Wear hearing and eye protection.

    WARNING! Turn the machine OFF and 

disconnect it from the power supply 

before inspecting, cleaning, changing 

accessories or conducting any other 

maintenance task.

      Double Insulation.

     The rotating part will continuously run for 

several seconds after you turn off the 

machine.

General Safety WARNINGS!

You and any other operator of this snow 

shovel must read, understand and follow these 

instructions in their entirety, and should reread 

them at the start of each snow season. 

Failure to follow these instructions may result in 

ELECTRIC SHOCK, FIRE and/or serious 

PERSONAL INJURY.

Pay attention to the personal safety alert 

symbols used in this manual to inform you of 

the WARNING associated with the particular 

operating instruction. This means that the 

operations requires special, ATTENTION, 

CAUTION and AWARENESS.

1.  

Replacement parts

 – When servicing 

this unit, use only identical replacement 

parts. Replace or repair damaged cords 

immediately. Do not use on gravel surfaces 

unless the snow shovel is adjusted for such 

surfaces in accordance with the operator’s 

manual.

2. 

Keep children, bystanders and pets away 

– All spectators, including pets, should be 

kept a safe distance away from the work 

area.

3. 

Dress properly 

– Do not wear loose articles 

of clothing or jewellery. They can become 

caught in moving parts. Wear rubber or 

winter boots. The electric snow shovel 

should not be operated in the hand-held 

position except when the instructions 

provided in this manual deem such use 

permissible.

4. 

Extension cords

 – To prevent 

disconnection of the snow showel cord 

Summary of Contents for YF6012-LE














Reviews: