background image

21

1-866-902-9690

OPERATION

WARNING!

Do not allow familiarity with products to make you careless. Remember that a careless fraction of a 
second is sufficient to inflict serious injury.

WARNING!

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so 
could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING!

Always turn off mower, make sure blades have stopped moving, and remove the start key from the 
mower when you are assembling parts, making adjustments, cleaning, or when not in use. This will 
prevent accidental starting that could cause serious personal injury.

WARNING!

Always inspect mower for missing or damaged parts and blades for damage or uneven or excessive 
wear prior to use. Use of the mower with damaged or missing parts can result in serious personal 
injury.

NOTICE!

Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, 
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until 
all missing or damaged parts are replaced. Please 

Yard Force Customer Service at 1-866-902-9690 

(US), or 1-833-818-4111 (CA)

 or a qualified service center for assistance.

APPLICATIONS

You may use this product for the purpose listed below:
•  Mowing your lawn

INSTALLING MULCH COVER (See Fig.11.)

The mower is configured for side discharge when shipped. If mulching is desired:
•  Set parking pedal, turn off mower and remove key. Ensure the blades have stopped.
•  Lift the side discharge chute.
•  Place the mulch cover over the opening for side- discharge.
•  Connect the mulch cover latches to the two side mounting points on the mower deck housing.
•  Release the side discharge chute.

WARNING!

Make sure the side discharge chute fully closes when finished. Failure to do so could cause serious 
personal injury.

  

Fig. 11

Goulotte 
d'éjection 
latérale

Trou

Set du couvercle 
du broyeur

Trou

Trou

Trou

Summary of Contents for YF56vRX-RER38-Li50












































Reviews: