14
15
Fig. 9
Socket
Grass collection
bag
4. Hook the strap hook of the grass collection
bag on the center bar on the lower handle
frame (Fig. 10). Adjust the strap to an
appropriate height so that the grass collection
bag does not rub against the ground while
mowing or transporting the unit.
Fig. 10
Strap hook
Locking
strap
Grass
collection
bag
5. The mower can be used without the grass
collection bag. When the grass collection
bag is not attached, adjust the ejector flap
to a suitable position to shield flying grass
clippings (Fig. 11).
Fig. 11
Ejector flap
OPERATION
This reel mower is intended for private residential
use to cut grass in small lawns and gardens.
This reel mower is not intended to cut grass in
public parks, playing fields, farms, or forests. Do
not use this reel mower for any application other
than that for which it is intended.
Adjusting the Cutting Height
This cordless reel mower is equipped with a
4-position height adjustment system to tailor
grass cutting heights from 0.6 inch to 2.0 inch. To
change the cutting height of the grass, follow
the instructions below.
WARNING!
Before making these
adjustments, remove the battery and the
safety key from the lawn mower and wait
until the rotating blades have come to a
complete standstill.
ALWAYS FOLLOW ALL SAFETY
PRECAUTIONS AND RECOMMENDATIONS
LISTED PREVIOUSLY IN THIS MANUAL.
1. Power off the reel mower and remove the
battery and the safety key.
2. To adjust the cutting height, pull out the
height adjustment knobs on both sides of the
reel mower frame and insert the knobs to the
desired setting (Fig. 12).
Fig. 12
Height adjustment
knob (on both sides)
3. To adjust the reel to the highest cutting
position, place the adjustment knobs through
the top hole (position A) located on the sides
of the reel mower frame. To adjust the reel
to the lowest cutting position, place the
adjustment knobs through the bottom hole
(position B) located on the sides of the frame
(Fig. 13).
Fig. 13
Highest cutting position
Position A
Position B
Lowest cutting position
4. Other cutting heights are achieved by moving
the adjustment knobs to the settings between
the highest and lowest positions. Refer to
the mark beside the height adjustment knobs
when adjusting the cutting height (Fig. 14).
4-Position Height Adjustment:
(1) Low: 0.6 in. (15 mm)
(2) Medium: 1.0 in. (28 mm)
(3) Medium: 1.5 in. (39 mm)
(4) High: 2.0 in. (50 mm)
The cutting height tolerance is +/- 0.12 in. (3
mm).
Fig. 14
Cutting height mark
St Stopping
WARNING!
Before switching on the reel
mower, make sure that it is not in contact
with any foreign objects. Keep your hands
and feet a safe distance away from the
rotating mower blades and the ejector
opening. Failure to comply with these
warnings can result in severe personal
injury.
IMPORTANT:
Do not start the reel mower in tall
grass.
1. Make sure the unit's On/Off switch bail is
not squeezed on. Insert the battery and the
safety key in their slots (Fig. 15). Close the
battery compartment cover.
Fig. 15
Safety key
Battery
pack
Battery
compartment
cover
2. To start the machine, press and hold the
safety lock button, then pull the On/Off switch
bail toward you (Fig. 16). Once the machine
powers on, release the safety lock button and
proceed with operation.
Fig. 16
Safety lock
button
ON/OFF
switch bail
3. To stop the mower, release the On/Off switch
bail.
WARNING!
The mower blade will continue
to rotate for a brief period after the unit has
been switched off. Do not tilt or carry the
unit while the motor is still running and do
not touch the blade while it is still rotating.
Failure to comply could result in severe
personal injury.
Mowing Tips
WARNING!
Inspect the area prior to
mowing and remove all the stones, sticks,
wires and other foreign objects that could
be picked up and thrown by the rotating
blade. Failure to comply not only will
damage the mower blade, but can also
lead to serious personal injury.
• Be sure to check the blades periodically for
signs of wear and replace them at least once
per year, as described in the maintenance
section.