background image

8

9

8.  Never use or charge the battery if you suspect 

that it has been more than 12 months since 

the last time it was charged. There is a high 

probability that the battery pack has already 

suffered dangerous damage (exhaustive 

discharge).

9.  Charging the battery at a temperature below 

41°F (5°C) will cause chemical damage to the 

cells and may cause a fire.

10. Do not use battery that have been exposed 

to heat during the charging process, as the 

battery cells may have suffered dangerous 

damage.

11. Do not use batteries that have suffered 

curvature or deformation during the charging 

process or those that exhibit other atypical 

symptoms (gassing, hissing, cracking, etc.).

12. Never fully discharge the battery pack 

(maximum recommended depth of discharge 

is 80%). A complete discharge of the battery 

pack will lead to premature aging of the 

battery cells.

Protection from environmental influences

1.  Wear suitable work clothes. Wear safety 

goggles.

2.  Protect your cordless tool and the battery 

charger from moisture and rain. Moisture and 

rain can cause dangerous cell damage.

3.  Do not use the cordless tool or the battery 

charger near vapors and flammable liquids.

4.  Use the battery charger and cordless tools 

only in dry conditions and at an ambient 

temperature of 41ºF – 105°F (5°C – 40.5°C).

5.  Do not keep the battery charger in places 

where the temperature is liable to reach over 

105°F (40.5°C). In particular, do not leave the 

battery charger in a car that is parked in the 

sunshine.

6.  Protect the battery from overheating. 

Overloads, overcharging and exposure to 

direct sunlight will result in overheating and 

cell damage. Never charge or work with 

battery that have been overheated – replace 

it immediately, if possible.

7.  Store the charger and your cordless tool only 

in dry locations with an ambient temperature 

of 41ºF – 105°F (5°C – 40.5°C). Store your 

lithium-ion battery pack in a cool, dry place 

at a temperature of 77°F (25°C). Protect the 

battery pack, charger and cordless tool from 

humidity and direct sunlight. Only place fully 

charged battery in storage (charged to at least 

40%).

8.  Prevent the lithium-ion battery pack from 

freezing. Battery pack that was stored below 

32°F (0°C) for more than 60 minutes must be 

discarded.

9.  When handling batteries, be wary of 

electrostatic charge. Electrostatic discharges 

can damage the electronic protection system 

and the battery cells. Avoid electrostatic 

charging and never touch the battery poles.

SAFETY SYMBOLS

The following table depicts and describes safety 

symbols that may appear on this product. Read, 

understand, and follow all instructions on the 

machine before attempting to assemble and 

operate.

DANGER!

 Rotating blades.

Keep hands and feet away.

Keep bystanders and children a 

safe distance away.

Safety Alert. Caution.

To reduce the risk of injury,

user must read instruction 

manual.

Wear eye and hearing 

protection. For protection 

against injury, wear ear

defenders and safety goggles.

WARNING!

 Do not expose or

operate the unit in rain or wet

conditions. Keep dry.
Wear protective gloves and

non-slip footwear when using 

the machine and handling 

debris.
Slip on slope hazard – Use extra

caution when mowing on slopes 

to prevent slip and fall accidents.

Severing of toes or fingers by

rotary mower blade.

Thrown objects and rotating

blade can cause severe injury.

Keep bystanders a safe distance

away from the work area.

Blades continue to rotate after

machine is switched off.

Rotating blades, keep hands 

and feet away from the opening 

while the machine is running.

WARNING!

 Always turn the 

machine OFF and remove the 

safety key before conducting 

inspection, cleaning and 

maintenance.

Look behind when backing up 

with the mower.

Two handed holdIndoor use 

only. Only use battery charger 

indoors.

Summary of Contents for YF20VRX-RM












Reviews: