![background image](http://html.mh-extra.com/html/yard-force/y4gs-a18-0001/y4gs-a18-0001_operators-manual_905761016.webp)
14
OPERATION
GETTING STARTED
It is very important to always keep the cutters sharp for smooth and safe
operation.
BEFORE STARTING CHECK THE OPERATION OF THE CHAIN BRAKE
•
The chain brake should be activated by pushing it
forward before starting
NOTE:
The brake lever should be able to snap into both
positions. If strong resistance is felt, or lever does not move into either position, do not use
your saw. Take it immediately to a Service Centre for repair.
•
Fill the fuel tank with 40:1 fuel oil mix.
•
Fill the oil tank with chain bar oil.
NOTE:
Whenever you refill the fuel tank with fuel you must also top up the level of
chain bar oil in the oil tank.
STARTING THE ENGINE
•
Push the engine on/off switch up to the
''ON'' position.
•
Press the primer bulb several times. This
assists with starting and reduces the
number of pulls need to start. Pull out the
choke knob.
A