![background image](http://html1.mh-extra.com/html/yard-force/phceg02a/phceg02a_manual_905770044.webp)
42
OPERATION
Connecting to the power supply
WARNING! Before connecting the device to the power supply, make sure the voltage of the
power supply must be the same as the voltage addressed in the rating label.
Connect the plug of this device to main supply.
Switching On/Off
As shown in Fig 8
WARNING! Clear the area to be cut before each use.
Remove all objects such as cords,
lights, wire, or loose string which can become entangled in
the cutting blade and create a risk of serious personal injury.
1. Hold this device firmly with both hands and use the
shoulder strap.
2. To switch on, push the safety button backward with
You thumb, at the same time, depress the main Switch
trigger and hold it in place. Then it allows to release
thumb from safety switch.
3. To switch off, release the main switch trigger.
Checking the chain lubrication
As shown in Fig 9 &10
The product may not be used without adequate chain
lubrication. Inadequate lubrication reduces
the service life of the product.
Use watch window to monitor the volume of Lubricating oil,
the oil level do not below the Minimum line.
1. Check the oil quantity in the tank from the viewing
window.
2. Switch on the device.
3. Hold the running chain saw approx. 15cm above a
suitable surface for a short time.
If the saw blade is adequately lubricated, the oil sprayed by
the chain saw will leave a slight trail.
Note If the saw blade is not adequately lubricated, please
contact authority Service center.
Fig.8
Step 1
Step 2
Fig.9
Watch window
Oil trail
Fig.10
Summary of Contents for PHCEG02A
Page 2: ......