![background image](http://html1.mh-extra.com/html/yard-force/phceg02a/phceg02a_manual_905770041.webp)
39
ASSEMBLY
Assembling the saw chain
As shown in Fig 3
WARNING! Due to saw chain is very sharp, Make sure wear protective gloves to prevent
possible personal injuries.
WARNING! Ensure the direction of cutting teeth must comply with the icon on the chain bar and
the symbol on the saw holder.
1. Unscrew the locking knob to remove the sprocket cover.
2. Lay the chain saw blade on the saw rail.
3. Hold the assembled saw chain and rail combination with one hand, using the other hand to lay
the saw chain around the sprocket, and ensure it fully engaged with the sprocket, lastly lay the
saw rail onto holder, ensure that the locking screw and raised ribs can well seated on the slot of
the saw rail.
4. Hold the tip of the saw rail with one hand to prevent the saw chain from falling off; place the
sprocket cover onto locking screw with the other hand.
5. Turn the locking knob clock-wisely, when you feel sprocket cover can hold the saw rail by itself,
turn the external ring clock-wisely to tension the saw chain.
Sprocket cover
Locking knob
Step 1
Step 2
Step 3
Step 4 & 5
Fig.3
Tensioning the saw chain
As shown in Fig 4
Ideal tension degree: The chain should not sag, but it should be possible to lift it a few millimeters
away from the saw rail.
1. Loosen the locking knob so that the saw rail can be moved back and forth.
2. To tighten the saw chain, turn the tension ring clock wisely. To loosen the saw chain, turn the
external ring Count-clock wisely.
3. After get an ideal tension degree, retighten the locking knob to hold the saw rail in place securely.
Summary of Contents for PHCEG02A
Page 2: ......