![background image](http://html1.mh-extra.com/html/yard-force/m0l-4et-200/m0l-4et-200_manual_3169154056.webp)
54
blade is adequately lubricated, the oil sprayed by the chain saw will leave a slight trail.
NOTE:
If the saw blade is not adequately lubricated, please contact authority service center.
Viewing window
Fig.11
Oil trail
Fig.12
Operating
Before using the high pruner, we strongly recommend that you read and understand the concept of a
rebound in chain saws.
Definition of the rebound
When the top edge or tip of the saw rail comes into contact with
wood or other hard objects, the device is flung towards the user
at high force which can cause extremely severe injuries.
Which area is most likely to cause rebound.
As shown in Fig 13
How to reduce rebound occurence
The risk of a rebound can be reliably reduced only by working
cautiously and correctly!
Suggestions for general sawing methods.
Pull sawing
As shown in Fig 14
This technique involves sawing from top to bottom with the
underside of the saw rail.
The chain saw pushes the product forwards and away from the
user. This way, the front
edge of the product forms a support, which intercepts forces
generated on the log when sawing.
With pull sawing, the user has much more control over the
product and is better able to avoid rebounds.
This is therefore the preferred sawing technique.
Fig .13
Fig .14
Summary of Contents for M0L-4ET-200
Page 2: ......