22
23
INSTALLATION
Install the 5 in1 lance (Fig. C)
Align the lance to the main housing and push down firmly and then rotate the lance to secure
in place.
NOTE
: Make sure that the lance button is position on the top side.
Attaching the hose adaptor (Fig. D)
Attach the hose adaptor onto the the Auqajet (hand tighten only).
Choose your water source (Fig. E)
1. Using the Aquajet with your garden hose pipe – attach the hose pipe to the Aquajet
connector and make sure that it is locked into position
2. Using the Aquajet with a portable water source – assemble the filter to the short portable
hose pipe supplied with the product and then connector the other hose connector to the
Aquajet connector and place into the water source
Connect the hose
Attach the hose to the Aquajet connector, make sure it is locked in to position when you hear
the sound "click" .
In keeping with current regulations a pressure washer must never be operated from the
drinking water mains supply without a controllable backflow p eventer. A suitable backflow
preventer in conformity with EN 12729 type BA must be used.
Water that has passed through a backflow p eventer is classified as undrinkable
NOTE
: A backflow p eventer is available from specialist retailers.
NOTE
: Water pressure out from the tap should not higher than 0.6Mpa.
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. 5 in 1 lance
2. Eco/Pressure Switch Button
3. Safety Lock Button
4. Battery Pack
5. ON/OFF Switch Trigger
6. Handle Rotary Lock Button
Check the delivery parts (Fig. B)
Remove the appliance from its packaging carefully and make sure that all of the
following parts are present:
a. 5 in 1 lance
b. AQUAJET housing
c. Hose
d. Water filte
e. Battery pack
f. Charger
g. Foam sprayer
h. Net bag
i.
Brush
j.
Instruction manual
k. Quick start guide
l.
Foldable bucket
m. Hose adaptor
WARNING:
If any parts are damaged or missing, do not operate this tool
until these parts have been replaced. Failure to heed this warning could
result in serious personal injury.
NOTE:
Always recycle the packaging in accordance with local recycling
guidelines
.
