28
29
Declaration of Conformity
We
SUMEC UK
Unit A&B Escrick Business Park Escrick, York YO19 6 FD/ United Kingdom
Declare that the product:
Description: 20V Cordless Pressure Washer
Q0W-SP01-320
LW C02A
Function: Clean the walls of buildings etc.
Complies with the essential health and safety requirements of the following directives:
Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
Standards and technical specification referred to :
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN 60335-2-54:2008+A11:2012+A1:2015
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
Authorized Signatory
Date: 30.04.2021
Signature:________________________
Place: York
Name: Mariana Hall
General Manager
SUMEC UK Co.,Ltd.
Unit A&B Escrick Business Park
Escrick,York YO19 6 FD
United Kingdom
TROUBLESHOOTING
Fault/
malfunction
Cause
Remedy
Appliance does not
turn ON
Battery pack discharged?
Fully charge the battery pack
Battery pack is not connected
correctly.
Install the battery pack once again.
Safety lock off button has not
been depressed
Check start procedure
1. depress lock off
2. depress switch lever
m/c PCB activated.
Restart the device
Pump frozen
Check and allow the appliance to
thaw
Appliance water
pressure too low
Eco button active (low motor
speed)
Press the Eco button once when
operating the machine (higher motor
speed)
Hose damaged or leaks in the
connections.
Change the hose - check the hose
for leaks and repair - securely tighten
the screw connection
Filter blocked
Clean filter on the appliance
Hose is trapped or kinked
Straighten out the hose
Inadequate water supply
Check water suply levels
The appliance /water source
height is too large
Lower the appliance - maximum
working height @1.5M- 5ft
Water leaks
The nozzle is not aligned with
lance correctly
Re-align the nozzle correctly with the
lance
O-ring split/broken
Replace the accessory or change
the O-ring
Attachment are not installed
correctly
Remove & re-install the attachment
correctly
Accessories broken
Replace accessories
Detergent cannot
spray out
Speed setting on Low
Select speed setting High
Deposits or restrictions in the
detergent system
Flush with clean water and remove
all debris
Battery not charging Battery pack too hot
Allow battery pack to cool down
before re-charging
DECLARATION OF CONFORMITY
Before performing any repair work, always ensure that the battery
pack has been removed from the Aquajet.
WARNING:
