5
(10)
Locate the parts to assemble
the floor joists.
(12)
Remove and organize them
for easy access.
(11)
Locate the hardware & fasten-
ers.
Assemble Floor
(16)
Continue this method for rest
of floor joists, using two 3” screws
per joist. *Holes are predrilled*
(17)
Before proceeding with floor-
ing, ensure that floor is square.
Both measurements need to be
equal.
(18)
If measurements are not
equal, move the ends of the band
board left or right, accordingly.
(13)
After making sure the pad is
level, locate the parts to assemble
the floor joists, and scatter them
out as shown.
(14) Note:
The band boards have
dado grooves precut to ensure
proper joist placement.
(15)
Begin with the end joist, mak-
ing sure the band board is flush
with the joist.
(866) 210-9273 - [email protected]
