the network to allow the unit to distinguish between them. The
data option shows all data being output by the device.
Ú
Note:
In most cases, setting the instance number on a 3rd party
product is not possible.
Configure a device
Devices may require configuration before use, they can be
configured once connected to the network.
Some devices show additional options specific to the device. For
example the Calibrate option, to allow easy setup of a device. For
device specific details, refer to the device documentation.
Diagnostics
Provides information useful for identifying an issue with the
network.
NMEA 2000
Provides information on NMEA 2000-bus activity.
Ú
Note:
The following information may not always indicate an
issue that can be simply resolved with minor adjustment to
network layout or connected devices and their activity on the
network. However, Rx and Tx errors are most likely indicating
issues with the physical network, which may be resolved by
correcting termination, reducing backbone or drop lengths, or
reducing the number of network nodes (devices).
Software setup
| YD42 Operation Manual
39
Summary of Contents for YD42
