Yanmar YD42, Operation Manual

Page: 9 / 56

- The left digit starts flashing
2.
Use the arrow keys to set the value for the flashing digit
3.
Press the enter key to move focus to the next digit
4.
Repeat step 3 and 4 until all digits are set
5.
Press the enter key to leave edit mode for the selected field
Selected field Field in edit mode
To cancel editing or leave a dialog:
• Press the pages key
• Press the menu key
Display setup
The display setup can be adjusted at any time from the Display
setup dialog.
To access the dialog:
• Press and holding the menu key
Backlight level
Adjusts the backlight level.
When the dialog is active, you can cycle the preset backlight levels
by short presses on the menu key.
Basic operation | YD42 Operation Manual
9