18 | RMB/ENERGIE GmbH
Display and operation
Manual neoTower
®
Power Storage | (02/2022)
5.4 Explanation of terms
The parameters with the recessed display values
can be modified by a technician.
Values with a white background can only be read
off.
5.6 Explanation of the terms in the CHP panel
SoC:
State of charge
Battery SoC:
Display of the current state of charge of the
batteries in %.
Battery voltage:
Current voltage of the batteries in volts.
Battery current:
Available flowing current of the batteries in
amperes.
Battery power:
Current power of the batteries in watts.
Min. SoC (unless there is a power failure):
Minimum permissible state of charge of the
batteries during mains operation in % (set value).
In parallel mains operation the value does not
fall below this set limit. This ensures a necessary
minimum runtime that the BOS system can bridge.
Switch:
Currently set operating mode in plain text.
Status:
Status display of the inverters in plain text.
Temperature alarm:
Display alarm in the event of overtemperature.
Low battery alarm:
Alarm display when the batteries are too low.
Overload alarm:
Alarm display in the event of inverter overload.
Max. SoC for CHP release:
Maximum state of charge of the batteries for
enabling start-up of the CHP in standalone mode
(set value in %). If the current state of charge of
the batteries drops below the set value, the CHP
is enabled. If the state of charge is above the set
value, the CHP cannot be started.
Max. power per phase to start the CHP:
Maximum permissible power value per phase. This
