RMB/ENERGIE GmbH | 15
Display and operation
Manual neoTower
®
Power Storage | (02/2022)
The inverter is switched off as the operating
temperature is too high.
Alternating flashing of the LEDs indicates that the
batteries are almost empty and at the same time
there is an overload.
If "overload" and "low battery" flash at the same
time, the ripple voltage on the battery connection
is too high.
The inverter is switched off as the ripple voltage on
the battery connection is too high.
The AC voltage at input AC-in-1 or AC-in-2 is
connected through and the charger is in constant
current mode ("bulk").
The AC voltage at input AC-in-1 or AC-in-2 is
connected through. The device is charging, but the
set absorption voltage has not yet been reached
(battery protection mode).
The AC voltage at input AC-in-1 or AC-in-2 is
connected through and the charger is in constant
voltage mode ("absorption").
5.2 Charger LED display
