Yanmar 6CXM-GTE2 Operation Manual Download Page 4 | Manualshive

Page: 4 / 50

background image

>

For Safe Operation

1

4

|

MARINE DIESEL ENGINE 6CXM-GTE2

Following the precautions described in this manual
will enable you to use this engine with complete
satisfaction. Failure to observe any of the rules and
precautions, however, may result in injury, burns,
fires and engine damage. Read this manual carefully
and be sure you fully understand it before beginning
operation.

1.1 Warning Symbols

These are the warning signs, which are used in this
manual and on the products. Pay special attention to
them.

DANGER

indicates an imminently hazardous

situation, which, if not avoided, WILL result in death or
serious injury.

WARNING

indicates a potentially hazardous situation,

which, if not avoided, COULD result in death or serious
injury.

CAUTION

indicates a potentially hazardous situation,

which, if not avoided, MAY result in minor or moderate
injury. It may also be used to alert against unsafe
practices.

The descriptions captioned by

��

are for

particularly important cautions for handling. If you
ignore them, the performance of your machine may
deteriorate, leading to trouble.

DANGER

WARNING

CAUTION

DANGER

WARNING

CAUTION

DANGER

WARNING

CAUTION

«
...
2
3
4
5
6
...
»

Summary of Contents for 6CXM-GTE2



















































Reviews:

No comments

Related manuals for 6CXM-GTE2

Brand: JetCat Pages: 74

Brand: hager Pages: 4

FIFTY-FIVE - REV1 11-2007

Brand: NOVAK Pages: 2

Brand: Power Fist Pages: 40

Brand: REXROTH Pages: 86

EM-PMI540-T4000

Brand: Danfoss Pages: 71

3T-MOTORS 3T35-R

Brand: 3T-Components Pages: 20

Brand: Superior Pages: 114

Brand: Perkins Pages: 128

Brand: Hitachi Pages: 41

Brand: Hitachi Pages: 1037

Brand: Hitachi Pages: 1104

Brand: Komatsu Utility Pages: 32

Brand: Newland Pages: 29

Brand: Teryair Pages: 13

Brand: Metronic Pages: 28

Brand: Raider Pages: 193

Brand: YS Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands