Yanmar 6CXM-GTE2, Operation Manual

Page: 13 / 50

4 Lub. Oil Filter
When the lube oil filter is clogged, the lamp will
light up. Replace the lube oil filter.
(3) Starter Switch
This is the main switch for starting engine operation. It
is a rotary-type, 3-step switch. Turning the key in the
switch changes position.
OFF is the position at which the engine is stopped.
All current is cut off. The key can be inserted and
removed in this position.
ON is the position for operation. Current flows to the
instruments and alarm devices.
START is the position for starting. When the starter
turns, the engine starts.
When you remove your hand the key returns
automatically to the ON position.
GLOW is the position for turning on the air heater. The
air heater aids starting during cold conditions by
warming up the intake air before starting.
(4) Stop button
Pushing the stop button on the right of the control
panel stops the engine. When the stop button is
pushed, the solenoid valve on the fuel injection pump
works to cut off the fuel supply and stop the engine.
Continue to push the stop button until the engine has
come to a complete stop.
Product Explanation
2
13 |
MARINE DIESEL ENGINE 6CXM-GTE2
>
Starter switch
Stop position
Drive position
Starting position
Stop button