Yanmar 6CXM-GTE2, Operation Manual

Page: 12 / 50

(1) Meters
The following meters are located in the upper center
part of the instrument panel.
 New C/D type panels use analog electric systems
and have a pointer indicator. Turn the panel illumination
switch ON for easy viewing.
• Tachometer
The engine’s rotation speed is indicated. Load and
engine rotation can be monitored.
• Hour meter
The number of hours of operation is indicated, and
can be used as a guide for periodic maintenance
checks.
• Cooling Water Temperature Meter
The cooling water temperature is indicated. Enables
monitoring of the cooling condition of the engine.
• Lube Oil Pressure Meter
The engine oil pressure is indicated. Enables
monitoring of the condition of the engine’s lube oil
pressure.
• Boost Press. Meter
The air intake pressure is indicated
(2) Alarm Devices
When there is some problem during operation, such
as battery charge failure, abnormal fresh cooling water
temperature, abnormal lube oil pressure, the alarm
buzzers will sound and lamps will light up.
• Alarm buzzers
When the various alarm lamps light up, the alarm
buzzers will switch on at the same time and sound at
intervals. However, no alarm buzzer will sound when
the charge lamp lights up.
• Buzzer stop switch
When the buzzer sound is no longer necessary, it
can be turned off with the buzzer stop switch.
• Alarm lamps
The alarm monitor window indicates the trouble
spot when one of the symbols shown below lights
up. When operation is normal, the alarm lights are
off. However, should some problem arise, then the
sensors will pick it up and cause the light behind the
appropriate symbol to switch on.
1 Battery Charge
When the charge is abnormal, the lamp will light
up. When charging begins, the lamp will switch off.
(Alarm buzzer will not sound when the lamp lights up.)
2 C.Water Temp.
When the temperature of the cooling fresh water
exceeds the maximum (95°C or higher), the lamp
will light up. Continuing operation at temperatures
exceeding the maximum level will result in damage and
seizure. Check the load and the fresh water-cooling
system for any abnormalities.
3 Lub. Oil Press.
When the lube oil pressure falls below normal
level, the oil pressure sensor will register this
and the lamp will light up. Continuing operation with
insufficient oil will result in damage and seizure. Check
the oil level.
Product Explanation
2
12 |
MARINE DIESEL ENGINE 6CXM-GTE2
>