Yanmar 3TNV82A-B, Service Manual

Page: 57 / 394

GENERAL SERVICE INFORMATION
TNV DI Service Manual 4-17
Engine Oil
Adding Engine Oil
1. Make sure the engine is level.
2. Remove the oil cap (Figure 4-6, (4)).
3. Add the indicated amount of engine oil at the
top or the side engine oil filler port
(Figure 4-6, (5)).
4. Wait three minutes and check the oil level.
5. Add more oil if necessary.
6. Reinstall the oil cap (Figure 4-6, (4)) and
hand-tighten. Over-tightening may damage the
cap.
Engine Oil Capacity (Typical)
Note: These are the engine oil capacities
associated with a “deep standard” oil
pan. The oil capacity will vary dependant
upon which optional oil pan is used.
Refer to the operation manual provided
by the driven machine manufacturer for
the actual engine oil capacity of your
machine.
The following are the engine oil capacities for
various Yanmar TNV engines.
Engine Model
Dipstick Upper
Limit / Lower Limit
3TNV82A(-B)
5.8 / 3.8 qt
(5.5 / 3.6 L)
3TNV84,3TNV84T(-B)
7.1 / 4.1 qt
(6.7 / 3.9 L)
3TNV88(-B)(-U)
7.1 / 4.1 qt
(6.7 / 3.9 L)
4TNV84,4TNV84T(-Z)
7.8 / 4.2 qt
(7.4 / 4.0 L)
4TNV88(-B)(-U)
7.8 / 4.2 qt
(7.4 / 4.0 L)
4TNV94L
11.1 / 6.3 qt
(10.5 / 6.0 L)
4TNV98(-Z)(-E),
4TNV98T(-Z)
11.1 / 6.3 qt
(10.5 / 6.0 L)
4TNV106(CL),
4TNV106T(CL)
14.8 / 5.3 qt
(14.0 / 5.0 L)
4TNV106(VM),
4TNV106T(VM)
14.8 / 6.9 qt
(14.0 / 6.5 L)
TNV_DI_SM_A4.book 17 ページ ２００７年１２月６日 木曜日 午前９時２３分