YAMIT E.L.I. AF800N Series, Service Maintenance Manual

Page: 8 / 40

8
5. Initial Installation & Operation
General
The filter assembly is protectively packed with all parts assembled.
Installation
1. Remove the filter assembly from the wood platform.
2. Connect the filter assembly to the inlet line and outlet line.
3. Connect a drain pipe to the hydraulic flushing valve outlet opening (at
least 63 mm plastic pipe or 2" metal pipe and no more then 5 m long)
Confirm that water runs freely out of the drainpipe.
4. Check that all connections are properly secured.
5. Check that all nuts and bolts on the filter periphery are properly
tightened and secured.
6. Connect the batteries located in the control unit box as explained in
“Initial Operation” (See Figure 3).
Figure 2: Initial Filter Installation
5
AF800N