INDOOR UNIT INSTALLATION
Select installation location considering piping and wiring connection after the Indoor Unit has
been hanged. Then decide the piping wiring leading direction.
Be sure to lead the refrigerant pipes, drain pipes and connection wires out to its connection
location before hanging the unit if the opening on the ceiling has been decided.
Confirm sizes of the indoor unit and ceiling opening with the attached installation paper
pattern. (Please fix the paper pattern below the body with M5X16 screws (4).
（
）
Please select the space to install indoor unit according to the dimension show
above,then install correctly,and have enough space for maintenance.
18k ( Body dimension :580X255X580)
18-55k (Body dimension :840XAX840)
REMOTE CONTROLLER
(TEMP DN)
(TEMP UP)
In cooling mode, press this button, the unit will give
the maximum cooling temperature with 16
℃
In heating mode, press this button, the unit will give
the maximum heating temperature with 31
℃
10
TURBO
To switch - on /off
HEALTHY funtion.It is a button
which controls the ionizer or plasma generator only
for inverter type.
9
HEALTHY
To activate or deactivate of the movement of the
.
“
”
DEFLECTORS
8
To select the mode of operation
To
LED display (if present)
switch on/off the
To activate the function
SLEEP
“
”
In cooling mode,press this button ,the
perature
will increase 2
on the base of setting temperature
tem
℃
In heating mode, press this button, the
perature
will decrease 2
on the base of setting temperature
tem
℃
Decrease the temperature or time by 1 unit
Increase the temperature or time by 1 unit
To switch the conditioner on and off.
To set automatic switching-on/off
To select the fan speed of auto/low/mid/high
No.
5
11
6
4
MODE
DISPLAY
SLEEP
ECO
1
2
3
7
ON/OFF
FAN
12
TIMER
Button
Function
SWING
1
3
6
9
4
8
5
7
2
12
10
8
11
The outlooking and some function
of remote control may vary
according to the model.
The shape and position of buttons
and indicators may vary according
to the model, but their function is
the same.
The unit confirms the correct
reception of each press button with
a beep.
6
12
5
2
1
3
7
MID
AUTO
SWING X
HIGH
LOW
DRY
FAN
HEAT
COOL
FEEL
SLEEP
SWING Y
SUPER
TIMER ON
TIMER OFF
FAN
SWING X
SWING Y
SUPER
SLEEP
MODE
TIMER
8
13
In cooling mode, press this button, the unit will give
the maximum cooling temperature with 16
℃
In heating mode, press this button, the unit will give
the maximum heating temperature with 31
℃
SUPER
13
4-install hanger
Gas side
Liguid side
Drain hole
E-parts box
780
690
780 840
690
840
2 0 0～2 05
M =1 0～ 5
M =1 0～ 5
H
Unit:
mm
6
