Please adjust room temperature properly especially when the old men, children, patients
stay at house.
Lightning and other electromagnetic radiation may cause ill effect .If it is ,please plug
off the power switch ,and replug in ,then restart the unit.
Do not block the inlet of indoor unit or outlet of oudoor unit, any of blocks will reduce
cooling or heating efficiency.
FUNCTION AND OPERATION OF PANEL'S PARTS
1.PANEL
2.AIR FLOW LOUVER
3.INFRARED SIGNAL
RECEIVER
4.DISPLAY PANEL
5.AIR-Return
GRILLE
1.PANEL
2.AIR FLOW LOUVER
3.INFRARED SIGNAL
RECEIVER
4.DISPLAY PANEL
5.AIR-Return
GRILLE
To set the automatic switching on of the air conditioner.
To program the time start,the appliance should be off.
IMPORTANT!
Before proceeding with the timed start : program the working mode with
the key MODE(2) and the fan speed with the key FAN(3) . Switch the
conditioner off (with the key ON/OFF ).
Note:To cancel the setted function ,press the TIMER button again.
2. It suits for Body dimension :580X255X580 cooling and heating pump type.
Note:In case of power off,it is necessary to set TIMER ON again.
Press TIMER , Set the temperature with pressing the key
or
,Press
TIMER Again , set the time with pressing the key
or
, Press the key
more times till on the display you can read the time which passes between the
programming and the timed start.
▲
▼
▲
▼
To set the automatic switching-off of the air conditioner.
The timed stop is programmed with the appliance on.
Press TIMER ,
Note:To cancel the setted function, press the TIMER button again.
Note:In case of power off,it is necessary to set TIMER OFF again.
Set the time pressing the key
or
, Press the key more times
till on the display you can read the time which passes between the programming and
the timed stop.
▲
▼
Note: While the time was right settled, the TIMER function of this
remote(clock function) can set by half hours.
TIMER MODE----TIMER ON
2
3
11
TIMER MODE----TIMER OFF
1
2
3
3
FAN MODE
The conditioner works in only ventilation.
To set the FAN mode , Press MODE untill
appears in the display.
Whith pressing FAN button the speed changes in the following
sequence: LOW/ MEDIUM/HIGH /AUTO in FAN mode.
The remote control also stores the speed that was set in the previous mode
of operation.
In FEEL mode (automatic) the air conditioner automatically chooses the
fan speed and the mode of operation (COOLING or HEATING).
1. It suits for Body dimension :840X245X840 or 840X290X840 cooling and heating pump type.
4
