Yamato DR 200, Instruction Manual

Page: 9 / 44

6
Before Using this unit
Requirements for Installation
5. Do not modify 6. Installation on horizontal surface

Modification of this unit is strictly
prohibited. This could cause a failure.

Set this unit to the flattest place.
Setting this unit on rough or slope place
could cause the vibration or noise, or
cause the unexpectible trouble or
malfunction.
CAUTION!
7. Do not make an overload 8. Do not set samples in close formation

The withstand load of shelf is 15kg
（
uniform load
）
Set the samples apart
each other.

The temperature in furnace cannot be
controlled if too much samples are set
there. Make sure to use the shelf and
set samples apart each other so as to
make the free space of 30% or more to
the furnace to acquire accuracy of
temperature.
Make the free space of 30% or more
Do not modify To the flattest place
Samples
Shelf
15Kg