Yamato DF Series, Instruction Manual

Page: 27 / 72

24
4.
To choose and fix “Wait function”.
・
Choice screen for wait function is displayed only when it is set as “Time” of timer mode.
It is not displayed when it is set as “Hour” of timer mode, so proceed to the next stage
“Choice of fan”.
・
Turn jog dial to choose either “On” or “Off” and press the jog dial to fix it.
Wait OFF
Auto-stop OP.
（
Wait function choice screen
）
5. Choose “Fan”.
・
Turn jog dial to choose either “On” or “Off” and press the jog dial to fix it.
Fan OFF
Auto-stop OP.
（
Fan choice screen
）
6. Press Jog dial.
・
Fan function is fixed and auto stop mode operation starts. “Auto stop lamp” will change
from blink to flash and sub display indicates temperature and remaining time toward
operation stoppage.
Setup Temp100
℃↑
Stop,after 30min
STANDBY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
・
While wait function is “On”, when temperature of the inside of chamber is lower by 3
℃
or more, or higher by 6
℃
or more than setup temperature, timer countdown will be
suspended for a while and sub display indicates blinking sign of “Waiting”.
Setup Temp
１００℃↑
Waiting
３０ｍｉｎ
（
Indication in wait
）