Yamato DF Series, Instruction Manual

Page: 19 / 72

16
POWER ON/OFF
Turn the circuit breaker on.
・
When power supply is off, present date and time are shown on sub display.
※
Clock is not set correctly when it is forwarded from factory. Refer to page 49 for
handling and adjust date and time accordingly.
Push the POWER key
1999-09-17 12:00
待 機
終 了
ヒータ
ファン
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
POWER
MODE PROGRAM MENU
・
After short sound of beep, power supply is turned on.
Standing by
1999-09-17 12:01
℃
STANDBY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM.
電 源
運転メニュー プログラム 機能メニュー
・
After power supply is turned on, fan starts to spin and “fan lamp” flashes. Main display
indicates temperature of the inside of tank and “
℃
lamp” flashes. Sub display indicates
“standing by” and “standing by lamp” flashes. This is “On standby” state.
・
When you press “POWER” key again, the power will be turned off.
・
In case of first use, power supply of the equipment is still off. If you turn off short circuit
breaker while using or main power supply is shut out because of power failure, it will be
restored to the condition which main power supply is yet to be shut out. This is
“Instantaneous suspension recovery function”.