Yamato DF Series, Instruction Manual

Page: 30 / 72

27
3.
To edit operation wait time / hour
・
When program number is fixed, edit screen for wait time or start time appears. When
timer mode setup indicates “Wait Time”, it is to edit wait time to operate and when
“Start Time” is indicated, it is to edit start time to operate.
Wait Time
３０ｍｉｎ
Program OP.
（
Edit screen for wait time to operation
）
Start time
０：００
Program OP.
（
Edit screen for start time for operation
）
・
Turn jog dial and have designated time or hour display.
4. To press jog dial
・
Wait time / Start time will be fixed and it will go into operation standby of program
operation mode. While operation is in the state of waiting,” Program lamp” changes from
blink to flash and “Standby lamp” blinks. Sub display indicates program number and
remaining time toward operation startup.
Program P01
Start,rear 30min
STAND BY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
・
When remaining time becomes 0, program operation begins. When operation begins,
“Standby Lamp” goes out and sub display indicates segment number which is being
carried out and setup temperature.
Setup Temp100
℃↑
Segment P01-01
STANDBY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
・
While lamp is turned on, segment number and remaining time of Ramp time are
displayed alternately.
Setup Temp
１００℃↑
Segment
Ｐ０１－０１
（
Segment number during the practice
）
↓
Setup Temp
１００℃↑
Ramp after
３０ｍｉｎ
（
The rest time of the Ramp time
）